Analog-way XTD825 Bedienungsanleitung PDF herunterladen (Seite 21)

STUDIO SCAN XTD825 / 625™ Chapter 10 : RS-232 PROGRAMMER'S GUIDE (continued)

PAGE 21

10-4. COMMANDS AND RESPONSES TABLE

The following table resumes commands which are recognized as valid and the responses that will be returned to the control

device (on RS-232 port).

ASCII RESPONSE COMMAND TYPE VALUE

COMMAND DESCRIPTION MIN MAX DESCRIPTION

FRONT PANEL COMMANDS

z FRZ FREEZE. Rd/Wr 0 1 0 = freeze inactive 1 = freeze active.

a ASP Size mode selection. Rd/Wr 0 2 0 = underscan. 1 = overscan.

2 = ZOOM.

h HP Horizontal position adjustment. Rd/Wr 0 255

v VP Vertical position adjustment. Rd/Wr 0 255

w HW Horizontal size adjustment. Rd/Wr 0 255

s VS Vertical size adjustment. Rd/Wr 0 255

H ZHP Zoom horizontal position. Rd/Wr 0 255

V ZVP Zoom vertical position. Rd/Wr 0 255

W ZHW Zoom horizontal size. Rd/Wr 0 255 0 = 100% 255 =200%

S ZVS Zoom vertical size. Rd/Wr 0 255 0 = 100% 255 =200%

R REC RECALL. Rd/Wr 0 1 1 = recall (automatic reset)

M STO STORE. Rd/Wr 0 1 1 = store (automatic reset)

INPUT COMMANDS

D RGBI Input type Rd/Wr 0 1 0 = analog 1 = DVI

GP REFH Genlock H phase adjustment Rd/Wr 0 255

GS REFS Genlock subcarrier phase adjustment. Rd/Wr 0 65535

GL GLD Genlock load. Rd/Wr 0 1 0 = Hi-Z 1 = 75 ohms.

E SOGI SOG input selection. Rd/Wr 0 1 0 = no 1 = yes.

l LOAD H sync load selection. Rd/Wr 0 1 0 = Hi-Z 1 = 75 ohms.

OUTPUT COMMANDS

F OFMT Output standard selection Rd/Wr 0 7 0 = NTSC

1 = PAL

2 = NTSCj.

GR REFR Synchronization mode selection. Rd/Wr 0 1 0 = internal.

1 = genlock.

e OSIG RGB/YUV output selection. Rd/Wr 0 2 0 = YUV.

1 = RGBS.

2 = RGsB.

P OPAT Test pattern selection. Rd/Wr 0 1 0 = no test pattern.

1 = test pattern selected.

IMAGE COMMANDS

f FLK Flicker level selection. Rd/Wr 0 7

k BLK Black level adjustment Rd/Wr 0 255

r RLV Red level adjustment. Rd/Wr 0 127

g GLV Green level adjustment. Rd/Wr 0 127

b BLV Bleu level adjustment. Rd/Wr 0 127

L HSMT Horizontal smooth Rd/Wr 0 1 0 = OFF 1 = ON.

yp PRES PRESET Rd/Wr 0 1 1 = PRESET (automatic reset).

CONTROLS COMMANDS

yl LOCK Front panel locking selection. Rd/Wr 0 1 0 = unlocks all buttons. 1 = locks all buttons.

yc EPOS Erase memory. Rd/Wr 0 1 1 = erase all memories (automatic reset).

Y FRES Default value. Rd/Wr 0 1 1 = set all the parameters to the default value

(automatic reset).

xu VERU Device version

0 65535 Example: 104 = Version 1.4

xi I_ Identification number.

0 65535 Value displayed in hexadecimal in the device.

NOTE: * = available with the optional DVI input only. Rd = Read only command.

Rd/Wr = Read and write command.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 43 44

Kommentare zu diesen Handbüchern

Keine Kommentare

Analog-way XTD825 Bedienungsanleitung Seite 21

Kommentare zu diesen Handbüchern