Analog-way XTD825 Bedienungsanleitung PDF herunterladen (Seite 12)

Chapter 5 : LCD FUNCTIONS DESCRIPTION (continued) STUDIO SCAN XTD825 / 625™

PAGE 12

3 [IMAGE MENU] + ENTER.

3-1 [flicker filter] + ENTER.

Select one of the 8 levels of the anti-flicker with  and validate with ENTER.

3-2 [Black Level] + ENTER. (Not available for the DVI input source).

Adjust the Black level with  + ENTER.

3-3 [RGB Levels] + ENTER. (Not available for the DVI input source).

Select an item with  + ENTER.

• [Red] = Adjust the level of the Red with  + ENTER.

• [Green] = Adjust the level of the Green with  + ENTER.

• [Blue] = Adjust the level of the Blue with  + ENTER.

3-4 [under/over] + ENTER.

Select an item with  + ENTER.

• [underscan] = the output image is full screen.

• [overscan] = the output is 10% bigger than in underscan mode.

3-5 [H. smooth] + ENTER. (Not available for the DVI input source).

Select an item with  + ENTER.

• [ON] = active the horizontal filter.

• [OFF] = inactive the horizontal filter.

3-6 [position status] + ENTER.

Displays the image position status.

3-7 [zoom status] + ENTER.

Displays the image zoom status.

3-8 [preset] + ENTER.

This function allows to set all the image parameters (flicker filter, Black level, RGB level, under/overscan, position

& size) to the factory settings.

4 [CONTROL MENU] + ENTER.

4-1 [panel locking] + ENTER.

This function allows to lock the front panel buttons. Select an item with  + ENTER.

• [lock] = allows to lock the front panel push button.

• [unlock] = doesn't lock the front panel button.

NOTE:

To unlock push simultaneously on ENTER and EXIT.

4-2 [version] + ENTER.

Status of the internal firmware.

4-3 [erase memories] + ENTER.

This function allows to erase all the image settings memorized.

4-4 [default value] + ENTER.

This function allows to clear the following adjustments and set them to the factory value:

FUNCTION POSITION FUNCTION POSITION

1-2 Input type analog 2-4 RGB/YUV out YUV

1-3 Genlock H Ph 0 2-5 test pattern no.

1-4 Genlock Sc. Ph. 0 3-1 Flicker Filter level 1.

1-5 SOG input no. 3-2 Black level. 0

1-6 H sync load Hi-Z. 3-3 RGB levels. 0

1-7 Genlock load Hi-Z. 3-4 under/over underscan.

2-2 Output standard NTSC 3-5 H smooth off.

2-3 Output rate internal. 4-1 panel locking unlock.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 43 44

Kommentare zu diesen Handbüchern

Keine Kommentare

Analog-way XTD825 Bedienungsanleitung Seite 12

Kommentare zu diesen Handbüchern