Pulse LE - Ref. PLS200
Front Panel Description
EXIT/MENU: Home Menu or back one level
ENTER: Validates the menu or command
Select a custom transition
Press to select a layer, then choose an input.
PRESET: Recall a custom stored preset (4 memories available). To store a preset, use Menu -
>
Preset.
PIP: Display a live source
Bkgnd Live: Display a live source
FREEZE: Freeze the input linked to the current layer on MAIN
#1 to #6: Press to access analog source #1 to #6
DVI 1 to DVI 2: Press to access DVI #1 or DVI #2
SDI 1 to SDI 2: Press to access SDI #1 or SDI #2
BLACK: Clear the active layer
Hold for 3 seconds for stand-by Mode
CONTROL
EFFECT
LAYERS
INPUT SELECTION
STAND-BY
I N P U T S E T U P
1- Press the [EXIT/MENU] button from the Home menu (all functions must be
conrmed by the [ENTER] button)
2- Press INPUT and AUTOSET ALL
3- If the acquisition has failed, check all connections and perform a manual setup
4- For a comprehensive Input Setup, please refer to user’s Manual
5- For a manual input setup, press the [EXIT/MENU] button:
a) Select INPUT menu,
b) Select an input from Input #1 up to SDI #2, then
c) Select TYPE.
NOTE: To adjust input Size or Pos, use the Layer Menus.
To adjust Blanking, use the Auto-Centering or Blanking adjustments in the
Image menu.
Transition the pre-selected sources onto
the MAIN output with the selected effects
TAKE
O P E R AT I O N S O V E R V I E W
WORKING IN MIXER MODE
1- Select Background Live Button then select your INPUT.
2- On the preview screen, the input appears
3- Select an [EFFECT] (open/close)
4- Press [TAKE] to view the result on the Main screen
5- Try enabling the ‘Preset Toggle’ from the Control menu to have your preview
replaced by program during each Take
WORKING WITH PIPs IN MIXER MODE
1- Press the [PIP] button. On the preview screen, the PIP (layer) appears as a
color rectangle
2- Select an input. On the preview screen, the input appears in the layer rectangle
3- Adjust the PIP (layer) with Layer menu (Pos & Size or Zoom)
4- Select a transition (open/close) or an effect into “Layer menu”
5- Press [TAKE] to view the result on the main screen
6- To remove layer, press [BLACK] then [TAKE]
7- For another PIP setup, repeat from step #1
O U T P U T S E T U P
1- Press the [EXIT/MENU] button from the Home menu (all functions must be
conrmed by the [ENTER] button)
2- Select OUTPUT menu
3- Select OUTPUT FORMAT menu
4- On Format line, select the display’s native resolution, select the rate
5- Control or adjust your display device (Monitor or Video Projector)
6- If necessary, select TEST PATTERN in the Output menu
B U T T O N C O L O R U S A G E
#1 = Source is on the main outputs
Solid red: #2 = Freeze enable
#3 = Stand-by button
#4 = Preset Selection
Solid green: #1 = Source is on Preview
#2 = Function available for modication
Blinking red: Layer/source selected, and is currently active on
the main output
Blinking green: Layer/source selected, and is not currently active
one the main output
LAYER HIERARCHY
Background Live
PIP
(4 Seiten)
(53 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern