Analog-way Pulse Bedienungsanleitung PDF herunterladen (Seite 18)

Pin outs

• VGA

Standard VGA

1- Red 6- Red Return 11- ID Bit 0

2- Green 7- Green Return 12- ID Bit 1

3- Blue 8- Blue Return 13- H Sync

4- ID Bit 2 9- No Pin 14- V Sync

5- Test (Gnd) 10- Sync Return 15- ID Bit 3

• DIGITAL VISUAL INTERFACE DVI

1- TMDS Data 2- 7- DDC Data 13- Not used 19- TMDS Data 0 Shield

2- TMDS Data 2+ 8- Analog Vertical Sync 14- +5V (Power) 20- Not used

3- TMDS Data 2 Shield 9- TMDS Data 1- 15- Ground for (+5V) 21- Not used

4- Not used 10- TMDS Data 1+ 16- Hot Plug Detect. 22- TMDS Clock Shield

5- Not used 11- TMDS Data 1 Shield 17- TMDS Data 0- 23- TMDS Clock +

6- DDC Clock 12- Not used 18- TMDS Data 0+ 24- TMDS Clock-

C1- Analog Red Video (or Cr/Pr or C)

C2- Analog Green Video (or Y or Composite Video)

C3- Analog Blue Video (or Cb/Pb)

C4- Analog Horizontal Sync (or Composite Sync)

C5- Analog Common Ground Return

DDC = Display Data Channel

TMDS = Transition Minimized differential signal

• RS-232 CONNECTOR

1- NC 6- NC

2- Transmit data to PC (Tx1) 7- NC

3- Receive data from PC (Rx1) 8- NC (or +12V. dc)

4- NC 9- NC

5- Ground

• VESA DDC

1- Red 7- Green Return 13- H Sync

2- Green 8- Blue Return 14- V Sync

3- Blue 9- DDC+5 Volt supply 15- Data Clock (SCL)

4- ID Bit 2 10- Sync Return

5- Test 11- ID Bit

6- Red Return 12- Bi-directional data (SDA)

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 57 58

Keine Kommentare

Analog-way Pulse Bedienungsanleitung Seite 18